Audio-Technica ATR-6550 Video Camera Condenser Shotgun Microphone


Share/Bookmark
This review is from: Audio-Technica ATR-6550 Video Camera Condenser Shotgun Microphone (Electronics)
This is a good option if you want to use shotgun techniques with a consumer video camera. It gives sound that, after compression for youtube-level playback, would be difficult to distinguish from a professional mic. The sound is comparatively thin, it generates a small amount of internal noise, and its cabling is subject to indoor electrical noise, so it would knock a project out of contention for broadcast quality. But it pairs well with inexpensive camcorders and is an improvement over on-camera mics, especially if you don't mount it on the camera. It balances in a shock mount better than others in this price range.

Its cable is 3 feet long and coiled, and it's hardwired to the mic, so it picks up more electrical interference than a straight cable of the same effective reach. Simply having a jack would allow the option boosting the signal closer to the mic before a long cable run from a boom, for example.

But its biggest flaw is that it's unreliable. Mine had a bad internal wire connection and failed in its first hour of use. I've seen this happen with other sub-$100 shotguns. Audio-Technica has a generous lifetime warranty, and it's great to be able to trust the manufacturer to make it right; but one needs to be able to trust the gear itself. I wouldn't take this mic on a shoot without a backup, and then it's not such inexpensive option.

For Buy This Item, Click This Link !

Product Features

  • Designed especially for use with video cameras
  • 2-range settings: normal and tele
  • 3.5mm connector plugs into video camera
  • Freq resp: 70 Hz-18,00 Hz
  • Imp: Normal 1000 ohm +/- 30% and tele 2200 ohm +/- 30%
  • Freq resp: 70 Hz?18,00 Hz

Product Description

Amazon.com Product Description

Designed especially for use with video cameras, this condenser shotgun mic features a switchable polar pattern for effectively capturing nearby or distant sound sources. Get crisp and intelligible pickup in the studio or in the field.
A condenser shotgun mic for use with video cameras. 











Made for Video Cameras
The ATR6550 includes a camera mount for easy attachment to your video camera (also includes a standard stand clamp).
The 3.5mm mini jack connector plugs directly into your camera, and the included foam windscreen reduces wind interference in the field.

Switchable Range Setting
In its "Tele" range setting, or supercardioid pattern, the condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations.
When ambient noise is not an issue, or the sound source is nearby, switch to the "Normal" (cardioid pattern) range setting.


ATR6550 Specs

  • Element: Condenser
  • Polar Pattern: Normal: Cardioid; Tele: Supercardioid
  • Frequency Response: 70 - 18,000 Hz
  • Open Circuit Sensitivity: Normal: -56 dB; Tele: -45 dB
  • Impedance: Normal: 1,000 ohms; Tele: 2,200 ohms
  • Weight: 113 g (4 oz)
  • Cable: 1 m (3 feet) long, permanently attached cable with 3.5 mm (1/8-inch) mini-plug
What's in the Box
ATR6550 Microphone, Camera Mount, Microphone Stand Clamp, Foam Windscreen, 6.3 mm (1/4-inch) Adapter Plug, AA Battery

Product Description

Crisp & intelligible pickup—far away or up close. In its “Tele” range setting, this cardioid condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. Designed especially for use with video cameras.

Related articles



Article written by Rita

I am a housewife, and I also worked at one private company. My hobby of photography

0 comments:

Post a Comment

 
Back to TOP

ShoutMix chat widget
[zoom2clix | zoom click] | [close]